Esko blade BLD-DR8180 Kongsberg knife compatible for the Kongsberg XN/XL/V/X and the XP/C platforms
Product Introduction
Esko BLD-DR8180 balde is suitable for the Kongsberg XN/XL/V/X and the XP/C platforms. Esko BLD-DR8180 balde correspond to blade part number 42447284,Esko BLD-DR8180 balde with 8mm shank for use with the RM (RigidMaterial) knife tool, The length of the whole shank is 24mm, The length of Esko BLD-DR8180 balde is 40mm with 0.2mm tolerance range, The thickness of the cutting edge is 1.6mm with 0.05mm tolerance range, At the tip, the Angle between the two sides is 10 degrees.
The cutting edge of the head-up Esko BLD-DR8180 balde is provided with a 1.3mm deep groove in front and back at 4.2mm from the handle for installation, this groove can be polished or unpolished. The maximum cutting depth of Esko BLD-DR8180 balde is 5mm,Esko Kongsberg blade BLD-DR8160 is made of tungsten carbide or HM(Hard Metal), "PASSIONTOOL" mainly produce tungsten carbide blades.Tungsten carbide has obvious advantages over HM in terms of life and cutting effect.
Product attribute form
| Part No | Code | Recommend use/Description | Size&Weight | Photo |
| BLD-SR8124 | G42450494 | Good blade for cutting in different plastic corrugated materials | 0.8 x 0.8 x 3.9 cm 0.02 kg |
 |
| BLD-SR8140 | G42455899 | Good blade for cutting in different foam core materials | 0.8 x 0.8 x 3.9 cm 0.02 kg |
|
| BLD-SR8160 | G34094458 | Good blade for cutting in rigid materials such as different gasket materials, Forex and solid carton board | 0.8 x 0.8 x 3.9 cm 0.02 kg |
 |
| BLD-SR8170 | G42460394 | Long life tungsten carbide blade for thinner flexible materials such as folding carton, polyester film, leather, vinyl and paper. For use in the RM Knife tool. Length: 40mm. Cylindrical 8mm. Maximal cutting thickness about 6,5mm. 30' cutting edge. Nominal lag value is 0mm. | 0.8 x 0.8 x 4 cm 0.024kg |
 |
| BLD-SR8171A | G42460956 | Long life tungsten carbide blade for thinner flexible materials such as folding carton, polyester film, leather, vinyl, paper. 40' cutting edge. asymmetric knife blade that ploughs all burr’s and waste to one side. Very important to control the cutting direction when using this blade. Nominal lag value is 0mm. | 0.6 x 0.6 x 4 cm 0.011 kg |
 |
| BLD-SR8172 | G42460402 | Long life tungsten carbide blade for thinner flexible materials such as folding carton, polyester film, leather, vinyl, paper. 30' cutting edge | 0.8 x 0.8 x 4 cm 0.024kg |
 |
| BLD-SR8173A | G42460949 | Long life tungsten carbide blade for thinner flexible materials such as folding carton, polyester film, leather, vinyl, paper. 40' cutting edge. asymmetric knife blade that ploughs all burr’s and waste to one side. Very important to control the cutting direction when using this blade. Nominal lag value is 0mm. | 0.6 x 0.6 x 4 cm 0.011 kg |
 |
| BLD-SR8180 | G34094466 | Similar to SR8160. The blunter angle reduces the risk for breaking the blade in tough materials, but gives more overcut with thicker materials | 0.8 x 0.8 x 3.9 cm 0.02 kg |
 |
| BLD-SR8184 | G34104398 | For RM knife tools only. For cutting thin paper, folding carton and protective foam sheets for flexo plates. Works well on very "fragile" and "porous" materials such as beer coasters with a lot of recycled content. Long life tungsten carbide. Nominal lag value is 4mm. | 0.8 x 0.8 x 4 cm 0.015 kg |
 |
| BLD-DR8160 | G42447235 | Good blades for cutting rigid materials such as different gasket materials, forex and solid carton. Special Tungsten Carbide knife blade with an asymmetric edge, optimized for a nice cut ploughing all the burrs to one side. | 0.8 x 0.8 x 3.9 cm 0.02 kg |
 |
| BLD-DR8180 | G42447284 | Similar to DR8160. The blunter angle reduces the risk for breaking the blade in tough materials, but gives more overcut with thicker materials | 0.8 x 0.8 x 3.9 cm 0.02 kg |
 |
| BLD-DR8210A | G42452235 | Special Tungsten Carbide knife blade with an asymmetric edge, optimised for a nice cut ploughing all the burrs to one side. Requires that you can control the cutting direction. Good blade for cutting different plastic materials. | 0.8 x 0.8 x 3.9 cm 0.02 kg |
 |
| BLD-SR8170 C2 | G42475814 | Long life tungsten carbide blade for thinner flexible materials such as folding carton, polyester film, leather, vinyl, paper. 30' cutting edge. Nominal lag value is 4mm. For use in the RM Knife tool C2 coated for longer life time | 0.8 x 0.8 x 4 cm 0.02kg |
 |
| BLD-DR8160 C2 | G42475806 | Good blades for cutting rigid materials such as different gasket materials, forex and solid carton. Special Tungsten Carbide knife blade with an asymmetric edge, optimized for a nice cut ploughing all the burrs to one side. | 0.8 x 0.8 x 4 cm 0.02kg |
 |
| BLD-SR8174 | G42470153 | The long life tungsten carbide blade for corrugated board, is developed especially for use in the RM and CorruSpeed knife tool. The knife tip is optimized for long life time.
Length: 40mm. Cylindrical 8mm. Maximal cutting thickness about 7mm. 30' cutting edge. Nominal lag value is 0mm |
0.8 x 0.8 x 4 cm 0.024kg |
 |
| BLD-SR8184 C2 | G34118323 | For cutting thin paper, folding carton and protective foam sheets for flexo plates. Works well on very "fragile" and "porous" materials such as beer coasters with a lot of recycled content. Long life tungsten carbide. C2 coated for longer life time | 0.8 x 0.8 x 4 cm 0.02kg |
 |
| BLD-DR8260A | G42461996 | Special tungsten carbide knife blade with an asymmetric edge, optimised for a nice cut ploughing all the burrs to one side. Requires that you can control the cutting direction. Good blade for cutting different plastic materials. Blade tip arrow grinding: 0,5-1,0 | 0.6 x 0.6 x 4 cm 0.02 kg |
 |
| BLD-DR8261A | G42462002 | Special tungsten carbide knife blade with an asymmetric edge, optimised for a nice cut ploughing all the burrs to one side. Requires that you can control the cutting direction. Good blade for cutting different plastic materials. Blade tip arrow grinding: 0,4-1,5 | 0.6 x 0.6 x 4 cm 0.02kg |
 |
| BLD-DR8280A | G42452227 | Special Tungsten Carbide knife blade with an asymmetric edge, optimised for a nice cut ploughing all the burrs to one side. Requires that you can control the cutting direction. Good blade for cutting different plastic materials. Good blade for cutting dif | 0.8 x 0.8 x 3.9 cm 0.02 kg |
 |
Product details
Product Application
Esko BLD-DR8180 balde is Drag blade often used in various materials such as Cardboard, Corrugated plastic, Foil, Folding Carton, Magnetic foil, Polipropylen, PVC, Reflective foil, Vinyls and so on.
Introduction of the factory
Chengdu Passion is a comprehensive enterprise specialized in designing, manufacturing and selling all kinds of industrial and mechanical blades, the factory is located in panda’s hometown chengdu city, sichuan province.
The factory occupies almost three thousand square meters and includes over one hundred and fifty stuff. “passion” has experienced engineers, quality department and completed production system, which includes press , heat treatment, milling, grinding and polishing workshops.
“PASSION” supplies all kinds of cutting machine blades. meanwhile, the customized product is available.
passion's professional factory services and cost-effective products can help you to get more orders from your customers. we sincerely invite agents and distributors from various countries. contact us freely.
About Us
"PASSIONTOOL" Tungsten steel blades are customized according to customer's drawing requirements or sample production of various non-standard specifications tungsten steel blades, based on the customer's actual cutting purposes, to meet the customer's best use requirements. Tungsten steel is mainly used in the manufacture of high-speed cutting tools or tools for processing hard materials, such as turning tools, milling cutters, reamer, boring tools, drill bits, cutting knives, etc.
